▶AI VisionCube ST Pro
The AI VisionCube ST Pro is the industrial-grade upgrade of the ST line with 640×512 thermal at 50Hz alongside the single visible-light camera. 1 TOPS AI compute, multi-spectrum target identification and lightweight modular design deliver flagship thermal performance for the most demanding mono-camera UAV deployments.
Full Technical Parameters
Built for real-world UAV operations
Long-Range Search & Rescue
640×512 resolution at 50Hz delivers 4× more thermal pixels than the standard 384 module, dramatically extending the range at which human and vehicle heat signatures can be confidently identified.
Critical Infrastructure Monitoring
Sharper thermal imagery resolves smaller anomalies on power transmission lines, refineries, industrial sites and solar plants, enabling earlier fault detection during routine UAV survey flights.
Tactical UAV Surveillance
Multi-spectrum auto-lock combined with high-resolution thermal makes the ST Pro suited to professional security, emergency-response and border-patrol UAV operations across all light conditions.
AI VisionCube ST Pro: Flagship 640×512 Thermal Imaging for Single-Camera UAVs
The AI VisionCube ST Pro upgrades the standard ST configuration with a high-resolution 640×512 thermal module operating at 50Hz — four times the thermal pixel count of the 384 variant and double the frame rate. For UAV operators who need maximum thermal image clarity in a single-visible-camera form factor, the AI VisionCube ST Pro delivers flagship thermal performance without the cost or weight of a dual-visible-light setup.
The 640 thermal sensor maintains the same 12µm pixel pitch and 8–14µm LWIR spectral band as the smaller 384 module but expands the field of view to 45.9° × 36.9°. The result: dramatically improved target identification range, finer thermal anomaly detection on industrial assets, and significantly sharper imagery during search-and-rescue operations where every pixel of definition matters.
The 1 TOPS image-processing board, YOLOv7-derived multi-target tracking, crosshair auto-lock, dynamic memory tracking, and picture-in-picture architecture all carry over unchanged from the standard ST. The AI VisionCube ST Pro identifies up to 50 dynamic targets simultaneously, locks onto subjects in 0.5 seconds, and re-acquires occluded targets within three seconds via Kalman-based trajectory memory.
Mechanical integration remains effortless: 9–16V input, CRSF protocol, BetaFlight and ArduPilot firmware, sub-200g total kit weight, and integration into 7-inch industrial UAV airframes in under five minutes. The 640 thermal module measures 26×26×21.1mm (excluding lens) and weighs ≤23g, keeping the AI VisionCube ST Pro within the same payload envelope as smaller variants while delivering best-in-class thermal resolution.
Common Questions
Ready to order the AI VisionCube ST Pro?
Contact our sales team for factory-direct pricing, sample availability, and OEM customization. We respond within 24 hours.
